- How to learn to ride a skateboard
- How to brake on a skateboard
- How to do tricks on a skateboard for fingers
Skateboarding is a very traumatic sport, so protection is needed here, especially in the initial stages. Knee pads, elbow pads, helmet - the required elements of rider uniforms. You can also buy protection for your wrists, as falling on a skateboard often leads to fractures of these joints.
Do not be afraid of falls. The more often you fall at the training stage, the fewer falls there will be in the future.
Be sure to go to the doctor for any suspected injury.
You can ride a skateboard in any shoe and even barefoot, but the riders use special sneakers, which are reinforced in places most prone to abrasion. These shoes are sold in specialized skate shops.
- how to learn to ride a skateboard
Of course, skateboarding is a tough kind of sports. Taking into account such a classification of this sport, the first thing to do is to see the uniform of a skater:
- High quality sneakers for skate.
- Durable reliable helmet.
- Knee pads and elbow pads (protective pads).
Probably, there are young people who, according to the code of "tough guys", should not wear "different stuff" on themselves. But again let us turn to Alexander Vasilyevich and his precise definitions:
Happiness depends on the rules - fortune on chance!
And now, let's start.
Lesson 1. Stand on a skateboard
Primary logic for a beginner: you need to learn not to ride, but to stand on a skateboard. If a skate has just been bought in a store or made by hand, you need to get used to the board, examine all its advantages and disadvantages, convenience or inconvenience.
Rack on a skateboard - the first lesson for every beginner athlete. Without understanding the subtleties of the correct placement of the feet and the regulation of the center of gravity, it is difficult to control the projectile
You should set the board on a flat surface and try to stand on it. Having mastered a stable rack, you can proceed to the lessons of balancing with the movement of the center of gravity of the body to the front or rear wheels. Further, it is recommended to learn easy jumping on the board.
You need to get used to the relaxed stance and confident jumping on a skateboard, regardless of the position of your feet. Feelings of the real size of the skateboard and the working platform of the tool should become familiar, and the actions of the skater free, confident.
Lesson 2. Defining a stubborn foot.
The physiological characteristics of people are different. Therefore, starting to learn to ride a skateboard from scratch, you need to decide on a stubborn (pushing) foot.
The definition of a stubborn foot for each individual athlete is seen as a purely individual concept. Here (in the picture) stubborn - left. Rare option, but possible
If for some it is more convenient to act with the left, and for others with the right foot, then so be it. Skateboarding does not set strict rules here.
Lesson 3. Learn to push a skateboard.
To learn how to push a skateboard and move on it, it is recommended to go along with the tool on the pavement or a free concrete platform. You need to choose a place with a smooth surface, where it is easy to learn to skate even a child.
To start learning the lesson of movement is reasonable from an easy cruise in a selected area. To do this, the foot of the supporting leg should be placed on the board so that the toes of the foot are located exactly above the front track or with a slight indentation back from the border of the track.
The sequence of movements of the skater, which determines the beginning of the movement of the board on a flat surface. Attention should be paid to the position of the feet.
Further, acting with a stubborn foot on the repulsion, the skateboard should be set in motion, and then stand on the board with both feet.
As soon as the speed of movement starts to slow down, again push off with a stubborn foot from the surface of the site.
So, repeating these simple actions, the skater will quickly learn to ride a skateboard on even surfaces.
Lesson 4. Turns in the process of movement
To learn not only direct skating, but also to master the turns of a skateboard, you need to master the technique of body movements on the go. Uncomplicated smooth turn of the skateboard is achieved by small inclination of the upper part of the body in the direction of the turn.
But there is also another way - more effective. It is necessary to shift the center of gravity of the body to the rear wheels and with a slight tilt of the body try to steer the front wheels in the desired direction. Of course, some practice is required to master this technique.
Rotate - one of the specific tricks. But this trick is easy to learn with just a few practical lessons. The main thing is to understand the principle of execution of actions for making a turn.
So, having learned to ride a skateboard with turns, you can move on to more difficult exercises - the practice of riding on inclined planes. For a start, it is recommended to choose slopes not very steep, with small angles of inclination.
Lesson 5. Skateboard stop technique
The direction of the skater to study on the development of slopes of different levels, automatically entails the lessons of technology skateboard braking.
Stop motion - one of the many techniques of braking, which are used in skateboarding. Learning to slow down correctly depending on the situation is also an art.
There are four methods of braking that can be used in skateboarding:
Foot breaking: this is the easiest way to move the stubborn foot to the ground and gently brake. Nevertheless, despite the simplicity of the method, training is needed. It is impossible to step sharply with a stubborn foot on the ground. So not long to get hurt.
Heel roll (heel drag): the second method also requires some practice. It consists in actions when the heel of the pushing (thrusting) legs press on the back of the skateboard to raise the front of the board above the back. The trick is quite complicated, does not exclude the fall of the skater.
Power Slide: a way borrowed from fans of roller skates. Those who learn to ride a skateboard from scratch, it is recommended not to rush to master this technique. All comes with experience.
The principle of braking here is based on a soft slip cut by the back of the board, with an exposure balance of vertical lift. Extremely difficult trick.
Jumping (Bail): fourth method (also simple). When there is no way to stop the skate by any other means, it remains to just jump off the board. In this case, the jump should be made, after bending the legs at the knees. It is easier and safer to jump in motion.
Lesson 6. How to do slalom on a skateboard
The slalom technique is relatively easy to comprehend. To do this, you need to learn to ride a skateboard, performing oblique movements of the body of the body toward the bow or stern of the deck. Having mastered the slopes in motion, it is not difficult to make the board turn in the right directions.
Slalom on a skateboard in this performance will never succeed. First, the principle of equipment is violated. Secondly, the girl has not mastered the lessons of balance and body relaxation.
Also in the process of performing slalom, the principle of pressure by weight with the transfer of a center of gravity to the back of a skateboard is important. This technique allows you to adjust the radius of rotation of the skate in the desired direction. The stronger the pressure on the beam, the steeper the turn will be.
A slalom on a skateboard is very similar to a snowboard slalom. If you need deep sharp turns, it is recommended to bend your knees and squat as close as possible to the board. Slalom is easier to do on a longboard, but in fact, it’s the same skateboard.
What are skateboards and how to make a choice
Now there are many different types of skateboards from fingerboards to waveboards. Skateboards differ mainly in material, length, the presence of a bend at the board, in the number of wheels, and, of course, in price and functionality.
Children should immediately buy a stunt skateboard. We recommend to buy a standard for beginners. It is easy to ride on it (especially fast) and you can perform any tricks. Such modern skateboards are comfortable and versatile.
If the standard skate is not very interesting for you, you can choose a longboard - it is not suitable for stunts, but it is very stable, it develops great speed, while riding the asphalt is imperceptible. This type is characterized by the shape of the board, the presence of the front part and the back (tail or tail).
When choosing a skateboard, pay attention to the wheel stiffness (it must be high: the harder the wheels, the softer the ride will be) and the deck cover (as non-skid as possible as a fall protection).
Do not choose a skate only for its design - this is not the main thing. Look at the price-quality ratio. You also need to take into account the age of the child and choose a board that is suitable in size. Currently, the lightest and smallest skates are made for children about 5 years old.
Size table for height:
There are two main methods of braking. The first one is to simply remove the back foot from the board and slow it down, but this can only be done on a flat surface. Or you can use the second option: move the supporting leg back, press down with the heel, slightly raising the board, and then jump.
Let the child try both ways (they will come in handy), the second one is sure to work out and when moving along an inclined one. When the child is already well mastered these methods, you can do something more spectacular: for example, jump off the board and take it in hand.
In order to turn, you need to move the supporting leg in the direction of rotation and press it on the board. Pressing force can adjust the angle of rotation. You can also help a little by turning the case. To practice, you can try to go around objects or ride around them.
For a sharp turn, ask the child to press on the heel of the back foot and at the same time shift the body weight in the direction of the turn. The front wheels will lift at this moment, it will balance the supporting leg.
What are skateboards?
First, let's list the main types of skateboards:
- The usual skateboard is used by many, it is the best suited for novice skateboarders.
- Penny Board is a smaller version of a regular skateboard. Such a model can be purchased for a child.
- The flobord is an unusual board with as many as 14 wheels (7 front and 7 rear, all the wheels arranged in a semicircle).
- Longboard - long board with wide pendants, designed for speedy descents.
- Streetboard consists of three moving parts.
- The stubord can be easily folded and placed in a backpack or bag.
- T-board is a two-wheeled maneuverable skateboard for professionals.
- A freeboard is a board with six wheels (three for each front and rear, two are paired, and one is single, located at a distance from the main suspension between the two main wheels).
- Pamgo. Wide wheels and special design allow you to ride, not pushing away, but only moving the center of gravity.
- Snakeboard. The board consists of two parts, fastened together by a crossbar.
- Longskate is a long board of an unusual streamlined shape with wide wheels.
- Fingerboard - skate for fingers.
- Dörtsurf is a real “SUV”. High throughput is provided by two bicycle wheels.
- The excursion runs on batteries and can climb the mountain and accelerate to 30 kilometers per hour.
What to look for when choosing?
Now we list the main criteria for choosing a skateboard:
- The board (deck) is the main part of a skateboard. First, pay attention to its width. It can range from 4.7-10.6 inches. If you are a beginner, then first choose a board of medium width (about 8 inches), and as you learn, decide what you need. But remember that a wide board will provide stability, and a narrow one - maneuverability. As for the length, it has almost no effect on the ride. The optimal bend and shape of a skateboard can only be determined in the process of skating. Now about the materials. Quality deck made of maple. Several layers (usually 7 or 9) are glued together with glue and covered with a special anti-slip layer (for this purpose, a coating similar to sandpaper is used). Some models have a bottom plastic layer that allows you to slide on the board along the railing.
- Wheels. They may have different width and stiffness. The advantages of soft wheels are cushioning and ride comfort and ease of handling. But there are also disadvantages. So, on a skateboard with soft wheels, it will not be possible to accelerate strongly. In addition, you will have to constantly maintain the speed and often change the wheels, because they will wear out faster. For riding on asphalt, it is better to choose wheels of medium hardness. As for the diameter, it varies from 50 to 180 millimeters. The optimal size for a beginner is 54 millimeters.
- Suspension connects the wheels with the board. Most often they are made of aluminum alloy, but other metals can be used, for example steel (it is more durable and heavier). The thicker the pendants are, the stronger the construction will be and the heavier the skateboard will be.
- Bearings. From their quality depends on driving safety and speed skate. Preferred manufacturers such as “Independent”, “Reflex”, “Pig Wheels”, “Bones”, “Lucky”, “TensoR”, “Speed Demons” and “Shake Junt” should be preferred.
Choosing clothes and shoes
Another component of success is correctly chosen shoes and clothes. Clothing must be sufficiently loose (but not too much, otherwise you will not be able to concentrate), breathing and light. Choose comfortable shoes so that you can concentrate on the movements and position of your feet.
Nobody is insured against falls, so you will definitely fall, and at first quite often. That is why you should purchase a full set of protective equipment in advance: knee pads, elbow pads and a helmet. And do not think that all this will make you ridiculous in the eyes of professionals. Everybody started once, but to break an arm or a leg or worse get a concussion would be extremely unpleasant.
For beginners, an ideal place would be with smooth asphalt and a minimum number of cars and people. This may be a quay or a small park. You should be comfortable, and at the same time nothing should distract you.
Master the basics
How to learn to ride a skateboard? Immediately it is worth noting that almost no one gets up on the board and goes. In learning to skateboard, consistency is important, so take your time and start with the simplest, and then move on to more complex elements.
Let us stop at each stage of learning in more detail.
Getting used to skateboard
So, the skateboard is bought, now you need to get used to it. To do this, put the board on a flat surface and just stand on it. In fact, it is not as easy as it may seem at first glance, because the skate will strive to slip and go. Balance, hold in one place and keep balance. When you will get it easily, proceed to the next step.
The comfort and quality of the ride will depend on the correct stand. One leg should be supporting, the other - jog. Jogging foot pushes and puts in the back of the board. And the supporting leg remains in front of the skate. Both legs should be located almost across the board.
To understand which leg will be the supporting leg, and which leg will be jogging, you can pass several tests. First, watch which foot you start walking or climbing up the stairs. That it will be the reference. Secondly, try to toss the ball in the air with your foot. That leg, which makes it more convenient, and will be the reference. And thirdly, ask someone to push you a little. That leg, on which you will resist with the threat of falling, will be the supporting one. But still you can find out everything to the end only in the process of learning and driving.
Now try to go. To do this, slightly push off with a jogging foot and place it at the end of the skateboard. Keep your balance. After a full stop, push off again. Each time push off harder, then several times.
We are improving
Tricks are aerobatics, so do not think that you will master them in a few weeks. Sometimes it takes months or even years.
- Ollie is a simple jump, during which the skateboard is off the ground.
- Nollie - the same jump, but from the main rack and with a click forward.
- Flip - complicated olly. During the jump board should rotate.
- Grab is a trick for a skateboarder to grab the board with his hands.
- Grind - slip on the suspension.
- Slide - slip on the board.
- Manual - balancing on one of the skate axles.
- Stand, lime, stell - keeping balance on the edge of an object.
Useful tips for beginners:
- Get to know more experienced skateboarders, follow their recommendations.
- Knead before skiing to avoid injury.
- Do not hurry. Start to learn tricks only when you begin to feel the board and control the body.
- Study the video tutorials to understand your mistakes and the essence of the movements.
Lesson 7. Practice skatepark on ramps
Практика скейтбординга на улице или на придомовой площадке отличается от практики катания по склонам, крутым спускам или на рампах скейтпарка. Самодельные рампы или те, что в скейт-парках, называют также «потоками» (Flow).
Скейтбординг на потоках, с переходами вверх и вниз, выглядит куда сложнее катания по ровным плоскостям. Здесь главная заповедь скейтера – всегда держать центр тяжести на опорной (передней) ноге. Не следует держать тело в напряжении. Relaxation is the second important principle for mastering riding on ramps.
Riding on skate park ramps requires good preparation and mastering of various board control techniques. Otherwise, do not avoid injury
However, there are nuances: when lifting is performed, the stop should be at the upper boundary of the flow. Then the descent begins and the center of gravity of the body changes. The supporting leg also needs to be changed.
That is, the working foot here is always connected with the direction in which to move. Therefore, body weight is transferred from one foot to another. The knees are always bent.
By the way, this is the second main commandment of a skater - to hold a stand on bent knees, without tension. In such a state, it is easier for the body to extinguish (compensate) the arising loads.
The rule of skateboarding: the more relaxed and bent at the knees, the easier it is to stand and roll on a skateboard. The upper body should also be kept in a relaxed state.
Lesson 8. Turn in the rear wheels
Having mastered the skills of braking, movement and slalom, it is time to start the practice of learning to turn on the rear wheels (Kickturn). Learning this trick can be considered vital for a skater.
Turning the board with the focus on the rear rollers is a trick of high complexity. But it is not necessary to begin with professional performance. For the assimilation of the principle enough small lift
Turn on the rear wheels (Kickturning) - the moment of balance on the rear rollers, the moment when you need to have time to swing the front of the board in a new direction. This action requires perfect balance. Only practice will help you learn to skinning.
The end result of learning is the ability to make a turn in both directions at any angle. Such tricks are necessary for riding on ramps. It is recommended to improve the rotation by 180º in the mode of small rises.
Lesson 9. Skate safety principles
Skateboarding is a painful sport without exaggeration. There is always the risk of falling and injury. Not by chance at the beginning of the article mentioned a protective helmet and lining for arms and legs. However, there are principles in skateboarding that will help reduce the number of injuries.
Items of equipment that will help pass all the lessons of skateboarding. As boxing is impossible without gloves, so a “cool” skate is unthinkable without equipment
So, when falling it is not recommended to put emphasis on hands. If the board has left from under the feet, you should try to group and fall so that the blow fell on the shoulder or body area. This principle will help to eliminate fractures in the wrist area, which is not rare in the life of skaters.
Excellence Lessons Learned
After completing the training, mastering all sorts of tricks by a skater is becoming a traditional practice. This is a normal process that can be started with the following list:
Ollie: a striking performance sports stunt, when in conditions of motion on a flat surface, the skater literally takes off along with the board.
Pop Shuvit (Pop Shuvit): An original trick, the result of which is the turn of a skateboard 180º under the athlete's feet at the time of the jump. In this case, the body of the skater is not rotated.
Manuals: a set of tricks, the performance of which mainly involved the hands of an athlete. Learning these tricks is a good balance learning practice.
Rail Stands (Rail Stands): sometimes the same trick is called Primo Stands. The difficulty of the trick lies in the fact that the skater needs to put the board on one edge, and on the opposite edge of the board to stand up yourself - to make a rack.
Of course, only part of all the practiced tricks was noted. For example, Kickflip, Grind and other tricks for skate parks, ramps, ramps are considered to be no less popular. There is something to learn, but slowly - at their own pace, fun and relaxed.
A bit of history
In fact, boards with wheels exist for more than half a century. Their creators were Californian surfers, who could not imagine life without their favorite sport.
In the mid-50s it was a regular surf with wheels. A rather cumbersome and cumbersome design did not differ in maneuverability, the maximum that it was good for was skating in a straight line. You could still drive around small obstacles on the road. About any tricks then the speech was not. However, in the 60s of the twentieth century, skateboarding became more popular, the first championships were held, designers and designers began to work on the shape of the board, which led to the creation of a modern, familiar configuration.
so I sit gathering information on the net, how to skate.
Here is what I found:
To learn how to drive a skate, first determine which foot you have. And braking and turning work, standing still.
Of the two legs on a skateboard, one must necessarily be a support.
Of the two legs on a skateboard, one must be required.
When you see on television, or you become an accidental witness of what guys and girls are doing on a skateboard, it doesn’t fit into your head: how such tricks can be performed on a “board with wheels”! Mostly teenagers ride skateboard, so our children often want to try their hand at this. But how to learn a child to ride a skateboard ?! This is nothing complicated! But first, let's understand what a skateboard is and what parts it consists of:
the deck is a board consisting, as a rule, of seven glued layers of Chinese or Canadian maple, the skin is self-adhesive tape. It is necessary so that the legs do not slide off while riding, the suspension is the metal part of the skateboard that connects the board with the wheels, the wheels, the bearings are an integral part of the skateboard, which affects the speed of movement.
Consider the highlights of riding a skateboard for beginners, how to ride it:
Skateboard (skate, rollerboard) - a board with small diameter wheels attached to it. Skate is used as a vehicle or as a projectile for performing sports tricks.
Probably every child, and an adult too, at least once, but wanted to try a ride on this popular and seemingly uncomplicated vehicle. Let's try to figure out how you can teach a child to ride a skateboard.
You need to learn on a flat road, where there are no cars, people, a park, pedestrian alleys. Do not forget about protection, for children it is especially important - it is necessary to purchase a helmet, knee pads, and protection for the wrists. It is better to teach children to skate already experienced skaters, or in a team of the same kids, but under the supervision of adults.
First, the child just needs to learn to stand on a skateboard. Support the child. Let him stand on the board, cross his legs, understand how to maintain balance.
Further, if a child.
Skateboarding is a young and modern sport. It would seem that there is nothing difficult in skating on the board. But in fact, to enjoy the ride, you need to learn a lot. Find out all the most important points.
Any workout for beginners begins with the purchase of good shoes and protection. Boots should be as comfortable as possible and be sure to have a flat base. Pros can skate whatever they like, but newcomers should think about their safety first. How to learn to ride a skateboard from scratch and not get serious injuries? The answer is only one - get a helmet and protection for the knees and elbows. About the purchase is unlikely to regret, in any case, exactly before the first fall ...
We get on the skate
Stand on a skate and try to balance on it, slightly bending down or moving your legs. You should be comfortable. First of all, it is important to determine which foot is your supporting leg, and that is what should stand in the back. The movement on the stairs most often begins with the supporting leg, the person puts it first when trying to fall, that is, most often it is the right foot.
Do you like to ride - learn how to slow down on the rollers
Can I lose weight with a hoop? Read in this one.
Skating on the board today is an actual lesson. Most of all this sport causes tremor in young people, who often literally rave about this hobby. Fans of this business specially acquire a board and travel around the city for whole days, learning various movements and elements. However, even half of the possible tricks can be done by one. And they want to learn everything. The secret is simple - active and many hours of training, because the falls, especially at the initial stage, can not be avoided.
On how to ride a skateboard, then - in the informational video.
First steps on the sports board
Time skating on a skateboard flies fun and unnoticed. However, before you perform at least the simplest tricks, you need to literally curb the unique board on the wheels.
First of all, you have to learn how to stand on a skateboard, keeping your balance. It is important to learn how to push off, brake and turn.
If you already have a board and a pair of strong sneakers, then you probably attended the question: how to learn to skate?
So, let's begin. To begin, you will need to learn basic, basic tricks. These include such tricks as: Ollie and kick flip. But before you start learning these tricks, you still need to learn how to ride a skateboard, learn how to feel it, be able to brake and turn, and also decide which foot is more convenient for you to get up on the board. It is difficult to describe in words everything that can and even needs to be seen. I advise you to start to see the video, what is at the end of the article. It is called “Skateboard First Steps,” and after viewing it, all the basic questions will disappear. Those who have been rolling for more than 6 years earlier have practically never had such clear and detailed films. There was little information and it was scarce. Today, the choice of everything (from video to boards and clothes-shoes) is simply huge.
This film taught not to skateboard.
How to learn to skate? Quite simply, if you want this and spend a lot of time training. In general, skating on skateboarding can be called a fun and fun activity. Everyone can master this art, but it will be necessary to make an effort, to show perseverance. How to learn to skate? First of all, you need to be able to stand on it, push off, as well as turn and brake. Only after that you can proceed to perform various tricks, for example, ollie, kickflip and so on.
If you do not know how to learn to ride a skateboard, then try to start at least to get on it. No need to rush, get used to the new position. Ideally, the skate should be a kind of continuation of your body. And in one minute you are unlikely to feel like that. You need to stand on a skate, and then try to transfer your own body weight from one foot to another. You need to feel the balance between the rear and front wheels.
Simplified skateboard is a board with wheels. Looking at skateboarders, it seems that managing them is quite simple: once you get up on the board, you’ve already gone. In fact, the question of how to learn to ride a skateboard is not so easy. For this you need to have certain skills, to be able to maintain balance, to feel the balance. In addition, you will need perseverance and a desire to achieve the goal. Someone makes it easy, others have to work hard to make even the simplest movements.
Before you learn to ride a skateboard on video or verbal description, you need to take care of your own safety. Professionals, as well as people who have long been familiar with the skate, can ignore the protection. But here is a newcomer, especially at first, it is very useful.
Get a lightweight and comfortable helmet to protect your head. Protect hands and feet with knee pads and elbow pads.
Basic skateboarding styles
- Flatland (from the English "flat land") - the very first style, which involves rolling and performing various tricks on a horizontal surface - asphalt, concrete slabs.
- Straight - as the name implies, this is a street riding style in which all sorts of ladders, railings, ceilings and chippers become the basis for stunts. In this style at the moment most skaters ride.
- Freestyle - a style very popular in the 70s-80s, in which tricks were required to be performed exclusively on one plane.
- Vert - style, which originated in 1976 thanks to the team of Z-Boys - because of the drought, they began to ride and do tricks on a skateboard in the dried-up pools. This is a ramp style trick.
- A park - the successor of the verta performed by tricks on the ramp, but now in the specially created for this skate parks, where special ramps are built to perform particularly spectacular and complex elements.
Whatever style one would like to learn to master, this process for a beginner will be time consuming and quite costly, since proper skating begins with the selection of high-quality and convenient equipment: boards, comfortable shoes, spare parts for a skateboard.
High-quality and convenient equipment
The most important property of a skater is his board, or in Russian board. For beginners, a good choice would be to purchase a so-called American kit, which includes the following components:
- tracks (suspension) and shock absorbers
- keys, bolts for fastening
Without questions, all these components need to be selected only in specialized stores and after consulting with the seller, who can choose the right combination of parts for a particular skateboarder. But there are also general rules in the selection, and you should know about them in advance.
The board is usually made of several layers of Chinese or Canadian maple wood, glued together. The quality of the glue depends on whether the deck will stratify. In some models intended for a straight, another plastic layer is glued to the bottom of the board (slick), which provides the board with a good sliding along the railing.
How to choose a board in order not to fall on a defective or dried copy? The easiest way is to chat on the skater forum and ask someone experienced to help with the choice. But if this option is unrealistic, you will have to act yourself.
How does the compass, how to determine the azimuth and how to navigate the compass, read our material.
If you like parkour, but you don’t know where to start, go here.
How to choose a skateboard yourself
If you decide to choose a skateboard for yourself or for a child, you need to pay attention to:
Deck width. It can range from 4.7 to 10.625 inches. For beginners, the optimal choice will be an eight-inch board, and already in the process of studying it will be easy to understand whether it is suitable or whether a board is needed wider or narrower. A wider deck gives stability and better grip. Narrow - more maneuverability.
From board length The complexity of skating is almost independent, and therefore you can choose any. The standard is considered 31 inches (78.7 centimeters). For very young skateboarders, small models are being released - mini-skateboard. Also, in general, does not affect for beginners the complexity and bend of the board (concave) - its convenience is determined only by experience.
When choosing, you need to carefully inspect the board for transverse cracks - this is a sign of marriage. But the longitudinal cracks in the area of the bolts are not so terrible - they appear, almost, on all the boards in the first week of skiing. The most famous board brands are Mystery, Jart, Toy Machine, Almost - if there is no experience at all in choosing boards, it is better to focus on them.
The next part of the board is pendants. They are selected depending on the width of the deck, they are mounted on wheels and bearings. The stiffness of the suspension is adjustable for different riding styles. Material - aluminum. Sometimes there is a suspension of steel, it is more durable, but also heavier.
Wheels for skateboarding there are a wide variety of types. For beginners, you should choose ordinary, hard wheels of medium size. Their size ranges from 50 to 180 millimeters. Standard 54 mm wheels will be optimal. It should be remembered that they will have to change often - the wheels are quickly erased when riding.
An important part of the kit - bearings. You should not save on them, since their quality depends on both the speed of the skateboard and the safety of the skateboarder itself. Therefore, it is better to avoid buying Chinese consumer goods, and look for bearings of such brands as Fkd, lucky or Crishe. In addition, bearings differ in number ABEC(Annular Bearing Engineering Council): 1 and 3 - low-end bearings for beginners, 5, 7 and 9 for professionals.
Skin or flu - this is a film that provides grip boards with shoes. It can already be chosen on the basis of taste preferences - with or without a pattern, no one has yet begun to ride on its color.
All these components form a single set, which, if properly selected, will greatly facilitate the comprehension of skateboarding skills.
You can learn how to tie the main climbing knots by reading the article on the link.
Before you go on a trip by car, read the page about what is camping.
We will understand how to learn to ride a skateboard to a novice
In beautiful videos it may seem that skateboarders easily perform complex stunts. Тем не менее надо понимать, что выполнение сложных трюков на скейтборде дается ценой длительных и терпеливых тренировок, а также ушибов и ссадин. Поэтому первый совет — купите защиту. Вам понадобится шлем для защиты головы, наколенники, защита локтей и ладоней. Правильно подобранный защитный комплект не доставит больших неудобств. С разбитыми коленями и ладонями будет значительно неудобней!
After choosing the ammunition, you should get used to the skate. To do this, you need to put it on a flat surface and learn to balance on it, stand, choose a comfortable body position, try to move your legs and rearrange them.
Then you need to understand which leg will stand in front - left or right. It does not necessarily depend on whether the person is left-handed or right-handed. To do this, you can try ponabiv any ball with your foot - the one that is more convenient to do it with great chances will be behind and becomes the reference. Another way to test this is to push a person. That leg, which he will push forward with a jerk, will be supporting on the skateboard.
After the correct setting on the skate, you can slowly begin to master the movement and stop. This long process will probably be accompanied by falls, but with the right board and the supporting leg set as it should be, progress in skating will be noticeable quite quickly. And therefore, you should not be shy, not be afraid to fall, and boldly ride first on a flat surface, then slowly learn to turn and overcome barriers. It is better to do all this on skate grounds, and it’s best not alone - in the company and under the music, the training will be more pleasant and fun.