Women's Tips

How to choose figure skates?

Pin
Send
Share
Send
Send


One of the favorite entertainments in winter is skating. Many people spend evenings on the rinks. Fans of ice entertainment will sooner or later have to think about purchasing their own skates. And there are a number of reasons. However, newcomers are worried about the question: “How to choose skates for beginners?” After all, this is a purchase for several years.

Why it is worth buying your own skates instead of using rolling

  • Hygiene. In the shoe there will be only the foot of the skater, therefore, there is no risk of infection with the fungus.
  • Do not have to sweat in plastic bags, which are offered in many rentals instead of hygienic socks.
  • The skates will be matched exactly in size and eventually spread under the foot of their owner.
  • There will be no rental to ice arenas. Often, small free sites are equipped in courtyards and parks. However, without their skates there is nothing to do.
  • With frequent visits to the rink can incur an impressive amount for the use of shoes.

The main reasons are clear. The only benefit of renting: here a newcomer can decide what he likes more (or leg). Even a little experience will help to solve the question: "Which skates to choose for beginners?"

Skate Varieties

Probably everyone paid attention that the shoes of figure skaters are not the same as those of hockey players. The skates of the latter are very different from speed skating, etc. Each shoe has its own shoes. Depending on the type of load, different blades are used, methods of sharpening, even the appearance of the shoe is strikingly different.

In total there are 3 main types of skates: hockey, curly and speed skating. Also, this list is often supplemented by amateur (or pleasure) and children. Which skates are better for beginners? To answer this question, you need to consider the characteristics of each type of ice shoes.

Hockey skates

Here everything is aimed at protecting the feet. Everyone knows that hockey is a rather aggressive and traumatic sport. There are frequent strikes with a club or on the side, it happens that the puck hits the leg. Shoes should protect the player from all these troubles. Therefore, comfort is often sacrificed for safety. Hockey skates are quite solid, they are made of synthetic materials and have hard inserts in the most open places. They always have a reinforced sock (it is made of plastic). On the other hand, a hard boot provides good support for the foot and ankle, fixing the foot in the correct position.

Another requirement that makes the game to the shoes - speed and maneuverability. Therefore, the blades of the skates have the shape of an arc, and they also have no teeth. This allows you not to cling to the ice, even at very sharp turns. The smaller the area of ​​contact with ice, the more maneuverable the player. However, balance will be harder to keep.

How to choose skates for beginners to play hockey? If you plan to skate on the open skating rinks, then you should not buy professional shoes. It is designed for temperatures up to –5. In severe frosts, the outer layer may crack. For outdoor games it is better to choose models from semi-professional and amateur collections. This shoe is able to withstand 20 degrees of frost without any damage. In addition, they are insulated, unlike professional ones. The warm insole is put in them, the edge is sewn, there are tabs that protect the feet from frost. You can ask the sellers in the store, which skates for beginners will be optimal.

Let's look at the results. This is not the most suitable option for beginners, since it is rather difficult to keep balance in hockey skates, so there will be many falls first. But if a person is going to run on the ice with a club, then you need to start in the appropriate shoes. If you already have a certain experience, you can safely buy hockey skates, since it is in them that you can perform various turns and some tricks, develop greater speed and quickly dump it. In other words, they provide greater freedom of action.

Figure skates

They provide greater stability on ice due to the long straight blade, which stands 2-2.5 cm behind the heel line. There are teeth on the front that allow you to stand on tiptoes and perform steps, jumps and complex pirouettes. However, this element delivers a lot of inconvenience to beginners. The teeth can cling to the jagged ice of street rollers, which often leads to falls. But otherwise, figure skates for beginners is the best option.

Make shoes from leather or substitutes. This provides a rigid fixation of the ankle, which will save from many injuries. However, skates are thin. As a result, it’s cold in the cold. The problem can be solved by using warm insulating socks. The boot is tall, with tight lacing, which makes it easier to control movements.

How to choose skates for beginner skaters? You should give preference to shoes with soles made of genuine leather. It perfectly absorbs moisture, which is very important during long skating.

Before buying, you should check the blades: they need to be bent a little and let go. The metal should return to its original position. If there is a bend, then the material is used poor quality, it is better to choose another pair.

Pleasure skates

One of the most diverse types of shoes for skiing. Models may be similar in appearance to hockey, curly or roller. However, they differ from all with a softer and warmer boot. Blades can repeat the shape of hockey, but in this case the arc will not be steep. Or figured, then the teeth or very short, or they are not at all. These skates are designed for those who plan to just skate and enjoy a leisurely walk on the ice, and not to drive with a puck or learn complex pirouettes. In general, an option for most visitors to open rinks.

Walking skates are designed for riding with comfort, so they have a softer boot. Lacing can be classic, and can be used buckley, like the rollers. Then the soft boot will be combined with plastic. However, the clasps can break and can only be replaced with a skate. Walking shoes are originally designed for extreme cold, so you can ride in any weather.

However, increased comfort leads to the fact that the ankle is not so rigidly fixed, and this increases the risk of injury. Also, a soft boot imposes serious restrictions on the possibility of performing pirouettes, jumps and other complex elements. All these features you need to know to decide which skate to choose. For beginners, walking is quite suitable.

Children's skates

Babies are offered shoes with a wider and more stable blade. Double runners can also be used. These are the best skates for beginners to ride at the age of 4-5 years. When the child gets a little comfortable with the new way of movement, you can buy shoes with a normal narrow blade. In this case, you can use children's sliding skates. Their appearance is reminiscent of amateur. They are suitable for easy skating on the ice. The stock at sliding models usually makes 3-5 sizes.

If a child plans to skate more thoroughly, then it is better to pick him figure or hockey skates. Depending on the chosen sport. Allowable stock - no more than 2 sizes. Otherwise, the shoe will hang on the foot, causing injury.

It is necessary for fixing the legs in the shoe. Reliable lacing distinguishes skates for beginners. Children may be interested in bright colored laces. After all, they are so nice and interesting to tie! But the optimal solution - the usual cotton laces. Synthetic will be untied, especially in the cold. Fasteners can not always be adjusted, and they are rarely located. Well, if the holes for the lace are often. This will ensure a secure fit and protect against injury. Not a bad option - a combination: the buck is located at the very top, and the rest is controlled by a cord. The shoe should sit tight, but not squeeze the foot. Check the quality of the lacing is simple: you can sit in the shoes and not fall back. Here, in fact, all you need to know about how to pick up skates for beginners.

New skates are usually stupid. Before you start skating, take them to sharpen. You should not try to do it yourself, because the procedure is performed on a special machine.

There are 2 ways to sharpen: under the groove and flat stone. In the first case, maneuverability is ensured, the ridge can go on the edge, when cornering it “bites” into the ice. In the second case - more contact surface with ice, better stability. It is suitable for beginners. Then you can peresochit under the groove.

Tips for choosing

There are several recommendations on how to choose skates for beginners:

  • You need to go to the store with a warm toe and try on shoes with it. The only way to find the perfect size.
  • Children can not buy too big skates. Stock - a maximum of 1-2 size. If you do not want to change them often, you can buy sliding.
  • To understand whether the skates are suitable, it is necessary to completely lace them up.
  • Try several pairs preferably. Then it will be clear which pad fits the leg.
  • In order to understand whether it is comfortable in skating, you need to walk and sit in them.

What skates are better for beginners or what to stop

In this variety is easy to get confused. Therefore, before choosing skates for beginners, you should decide which type of skating is closer. And already from this to make a start. So, if ice battles with sticks and pucks are planned, then you need to buy hockey skates, since no others are able to protect the leg well from injuries and strikes. For the performance of pirouettes, jumps, writing complex figures are used only curly. The rest will not be able to provide adequate stability and fixation of the ankle. However, if there are no special plans, it will be enough walking.

It makes no sense to buy expensive skates for beginners. Children will not stop any price tag: leg quickly grow. A lover is unlikely to be so often to visit the ice. For beginners to ride on smooth and even arenas, figure skates will be the best choice. For street ice, hockey or recreational with rigid ankle fixation are suitable. This will avoid injuries and will teach the foot to hold correctly.

The main characteristics of the figure skate blades:

Steel quality - that, on which the price of the product in the first place. Low cost blades slip worse, grind quickly and become dull. The high price is explained by the corresponding quality of steel, and this determines the ease of sliding, the length of service of the ribs. However, expensive blades are acquired mostly by professionals. Teeth on them, as a rule, are located uncomfortable for beginners and are designed for complex shapes.

The curvature of the blades is important when sliding. The blade on the side is slightly curved and if it is placed on a smooth ice plane, then the edge of the blade touches the surface only a few centimeters, this contact depends on the inclination of the boots and can change. The bend of the blade line affects the turns and rotations, the higher the amplitude, the more maneuverable the horse, but less stable, so the adhesion to ice is less. So it is better to strive for something average.

Blade height - this indicator practically does not affect the quality of riding. However, the lower the blade, the less oscillation and better stability.

The depth of the “groove” you can change when sharpening. The deeper the groove, the more stable the ridge, but the harder the rotation and uncomfortable braking. Sharpening skates produced by an amateur.

The blade, like the boot, has its the size, which must match.

In our country such brands of blades for skates as John Wilson (England), MK (England), Jackson Ultima Skates (Canada), Graf Blades (Switzerland) are known.

Blade adjustment

On ordinary skates, intended for popular mass pokatushek, the blades are attached to the shoe in such a way that they can no longer be adjusted. But on the professional, they are installed on several special screws, which are regulated by a specific figure skater. On inexpensive skates costing up to $ 150, Chinese blades are most often put, for example GS, of course this is not the highest quality: the bend of the blade is small, the steel is soft and wears off very quickly, the teeth are small and too high.

How to choose figure skates

After we have figured out what figure skating rinks are, let's decide what you want to do on the ice? Do you want to drive or just slide slowly, or maybe you want to master the virtuoso tricks? Anyway, it is possible to be guided by the price - the higher it is, the more chances that the quality is higher, but, unfortunately, this is not always the case. However, high-quality goods cannot be cheap.

Skates for initial figure skating classes

The name speaks for itself. These skates are inexpensive, have a lower stiffness. It is better to give preference to brands known for the production of skates: Risport (Italy), Graf (Switzerland), Wifa (Austria), Jackson (Canada), Edea (Italy), Riedell (USA), Botas (Czech Republic), Gam (Canada). They make both skates for professionals and skates for beginners. You can meet skates and other manufacturers - Roces, K2, Nordway, however, they do not specialize in the manufacture of skates.

Skates for fitness and for beginners go on sale already with attached blades. For mass skating blades are offered easier and cheaper: Graf Montana, Graf Arosa, Risport Siria, Lanser Kamilla, Botas Dagmar, Botas Juliet, Riedell Blue Ribbon. And more expensive models for figure skating: Risport RF4, Risport Etoile, Edea Uverture, Jackson Freestyle, Wifa Prima-Set, Graf Prestige.

Semi-professional figure skating skates

These skates have a higher quality blade and boots of greater rigidity. Often these are taken for skaters who are on mastering complex spins and double jumps. However, adults seeking to figure out the secrets of figure skating further, they also fit. As a rule, go on sale without a blade. The most popular are: Risport RF3, Edea Chorus, Graf Richmond, Gam 0050, Wifa Skatec Deluxe. Blades need to pick the same class, for example, JW Coronation Ace, Ultima Legacy, MK Professional, etc.

Professional figure skates

This is already a more serious inventory - for highly enthusiastic amateurs, and of course for professionals. The stiffness of the shoes is maximum, the blades are made of high quality steel, the sharpening is held for a long time, it slides perfectly. Under normal use, these skates will last a long time. Due to the good quality and a thick layer of skin on them, there are practically no deep wrinkles on the sides. Cost of such quality from $ 800-1000.

On what boot you do not stop the choice, as long as it fixes the ankle to avoid injuries.

If you want to buy a horse with an attached blade, pay attention to the fasteners. Well, if the extreme line of the platform at the blade coincided with the edge of the sole of the front of the shoe. A mismatch of no more than 3 mm is acceptable. Try on skates, walk around in lace-up boots - if your foot falls to the side (left or right), do not take your shoes - the blades are not centered.

How to try on figure skates

An important stage in the selection of figure skates - fitting. You need to try on the shoe on the rug so as not to scratch the blade on the floor. It is advisable to have with you socks in which you intend to ride. It is not necessary to be thick woolen socks, it is advisable to get by with a thin, elastic, tight-fitting foot. As in any shoe, you should not feel discomfort, anywhere should not reap, crush. Lace tight, but without fanaticism. The heel should be fixed in the back area of ​​the boot. Stand up, walk, the foot in the shoe should not move freely, the heel should not go up and down. Squat, bend your leg in different directions. At the slightest discomfort, give up this pair, because on the ice the sensations will increase. Do not buy skates that are great for you, they can spread and you will be uncomfortable in them.

Basic care for figure skates

After each ride, handle the blade with a dry cloth, use soft special covers for storage. Avoid plastic covers for the blades, as moisture can accumulate in them and the blades risk rust.

Do not use batteries and heaters to dry skates, like other shoes they need to be dried at room temperature!

Overview of Figure Skates

Figure skating is a very exciting activity. The ability to keep balance, make turns, jumps and even rotation, in fact, anyone can get at any age. To do this, you need to start, at least, to buy figure skates. And then you need perseverance and patience, and most importantly a great desire to learn how to skate beautifully!

Figure skates, like any sports equipment, must meet certain requirements. This applies to the form, material, and manufacturing technology.

Figure skates consist of two main parts, figure boots and figured blades (skates). В отличие от хоккейных лезвий, фигурные лезвия имеют спереди зубцы, которые дают возможность передвигаться на носках, прыгать и делают катание еще более интересным и разнообразным. Напрасно некоторые считают, что зубцы это “зло”. Not at all. Надо просто научиться ими пользоваться. Фигурные ботинки имеют еще одну особенность – каблук.Heel gives the correct distribution of the center of gravity skater.

What are the characteristics of the shoes? First of all - it is the material of manufacture of the top of the shoe. Preference is given, of course, to the skin. Leather is a great material for shoes. She “breathes” well, keeps warm, stretches and takes the shape of her legs. In professional shoes, leather can have two or even three layers to give the shoe greater rigidity.

Further, an important detail of shoes - lining. The lining acts as an interlayer between the foot and the top of the boot. It depends on how comfortable the leg will be when riding. On cheap models, it also serves as an additional boot top sealer. On professional shoes, the lining only serves as a shock absorber, carefully keeping the skater's legs. That is, a modern professional figured shoe is a hard three-layer leather upper and soft ergonomic lining that follows the shape of a leg. Linings are often thermoformed. This is when the shoe is first heated in a special stove to 90 degrees, then put on the leg, laced and wait 15 minutes. At the same time, the lining takes and remembers the shape of the leg, which gives the skater more comfort, allowing you to bypass the excruciating shoe rolling.

The material of the sole and heel plays a secondary role. The sole can be both from skin, and from plastic. Leather outsole absorbs vibration, well absorbs when jumping, keeps warm. But the plastic is lighter.

An important criterion of the boot is its rigidity. After all, rigidity is responsible for the safety and health of our ankle. For beginners, this stiffness is minimal, but for skaters who exercise a lot, do jumps, stiffness is of great importance, because The load on the shoe is serious. In professional skating, stiffness is the main criterion for the figure boot class. The manufacturer sometimes gives a stiffness number, for example 35, 48, 70, 85 ... A natural question arises - how can one visually determine the stiffness of a shoe? Yes, very simple. To do this, try to squeeze the shoe with your hand behind the heel in the ankle area. A soft boot can easily shrink completely like a rag. A shoe with a triple layer of leather will not give you a millimeter!

And yet, I want to destroy the stereotype that has been going on since Soviet times, that the higher the shoe, the better it is. In modern shoes, thanks to the latest technology, height does not affect the quality of the shoe. On the contrary, a high boot with a high stiffness will not allow bending the ankle when squatting.

Now we will sort the figured blades “by the bones”. As mentioned above, their main difference from other blades is the presence of teeth. But figured blades differ from hockey not only in the presence of teeth, but also in greater length and width. Therefore, these blades are more stable and comfortable when riding. The blade has two edges - external and internal. Between these ribs there is a groove, called “groove” or “groove”. So all the slip in figure skating happens on the ribs. Unlike roller-skate wheels, the edges of the blades hit the ice and have strong adhesion to the smooth surface of the ice, provided, of course, that they are well-sharpened. That's why ice skating is much easier to perform turns, rotations, spirals and costal jumps.

Figured blades are characterized by:

  • steel quality
  • shape, size, location, number of teeth
  • blade curvature
  • blade height
  • the depth of the groove
  • size

Steel quality - the main factor affecting the price. It can be said this is the main characteristic of the blade. Cheap blades do not slide well, hold sharpening poorly. The more expensive the blade, the better the steel and the better it will “fly” over ice, the fins will not rub off longer. But do not forget that expensive blades are designed for professionals. There and the teeth are arranged so that for beginners they will be uncomfortable. The teeth on the professional blades (especially the first bottom) are large enough, they are used for complex rotations and multi-turn jumps

Blade curvature has an important role when sliding. If you look at the blade from the side, you will see that the blade is not straight, but slightly curved. And if you put the horse on a flat surface, you can observe that the line of contact between the edge of the blade and the surface takes only a few centimeters and its location may vary depending on where you tilt the shoe, on the toe or on the heel. Thus, due to its bending, the blade can work wonders on the ice, it is easy to turn and rotate. The steeper the bend of the blade, the skate is more maneuverable, but less stable, since the area of ​​contact with ice is less. Therefore, we need a "golden mean" when choosing the curvature of the blade.

Blade height slip quality has little effect. But the lower the blade, the more stable the skates.

Depth of the “groove” can be changed in the process of sharpening. The deep “groove” gives better stability on ice, but, unfortunately, it makes it difficult to slow down and spin. Sharpened "groove" as they say, "an amateur."

If the roller skates need to regularly change the wheels as they are erased and wear, then the ice skates need to follow the sharpening of the blades.

Like boots, the blade is sized and measured in inches. The blade should strictly fit the size of the boot.

Popular figure blades of brands are popular in Russia:

  • John Wilson (England),
  • MK (England)
  • Jackson Ultima Skates (Canada),
  • Graf Blades (Switzerland).

Blades for mass skating riveted to the sole and they can not be adjusted. On professional skates, the blades are installed by experts first on several adjustment screws so that the skater can further “adjust” the blades. On cheap skates for mass skating at a cost of up to $ 150, the blades of little-known Chinese firms like GS are usually installed, or the blades are completely without any signs. The quality of such blades leaves much to be desired. The curvature of the blades is very small, the steel is not strong and is erased as a “soap”, the teeth are small and too high.

Skates for fitness

These are skates with boots, like those of roller skates, but with a heel and with teeth on the blades. They are made like soft, thick, comfortable boots. Warm, with a soft lining - such shoes would be ideal for winter. But to perform the elements of figure skating such skates are not very suitable, although they can be successfully used for ordinary recreational skating.

How to care for figure skates

Each time after riding it is necessary to wipe the blades with a dry cloth and put soft cloth covers on them. Do not leave them in plastic cases for blades in storage! The main enemy of the blades is rust, which can immediately appear on a wet surface. Do not dry your skates on a battery or heater - they, like ordinary shoes, are best dried at room temperature.

Like this article? Share with your friends!

Nastya. Wrote: I also heard about the blades (but for some reason it does not say here) that they should be stainless steel.
Well no . Rust for a sweet soul, if you do not wipe after skiing and do not dry. (Coronation Ace)

So it is not. From really stainless were Dynamo blades, but when it was: (

What are the types and materials of ice skates?

Ice skates are divided into four main types:

1. Pleasure are the most widely available and diverse type. In the models can be any color, height, cost, shape and materials. Often in such models the soles and shoes are made on the basis of lightweight plastic. Moreover, in such skates, the foot is rarely strictly maintained, which can be explained by the low cost. Blades of the same material as on hockey models are installed on recreational skates. Only they are with a thinner width, which makes it impossible to play with a heavy puck.

2. Hockey, also called masculine, are endowed with maximum protection against damage to the foot and ankle. Often, such models have a higher weight compared to recreational. This makes it possible to stand firmly and firmly on the ice, as well as carry out elements of varying complexity. Hockey skates are made with a body made of synthetic strong materials and endowed with additional strength reinforcement such as plastic pads that support clips, straps, ankles, and so on. In hockey skates, an additional metal mesh is installed to protect the heel and toe. In addition, the sole is compacted with plastic or rubber. Blades are of equal length with the boot and are made of chrome or nickel-plated steel.

3. Figuredare often purchased by women. Shoes in such models are usually made of artificial or genuine leather. Figure skates are sealed in the sole with plastic or rubber, and in the nose of the blade they have teeth. In the heel, the length of the boot is 2-2.5 centimeters shorter than the blade length. Thanks to this structure, skates have good maneuverability and tenacity.

4. Running designed for use in professional speed skating. These skates have a long blade and lightweight little boat. This contributes to the development of maximum speed on a semicircular and direct trajectory.

A selection of ice skates for beginners

In addition, in skating for beginners, a very important part is the shoe. They differ in materials of manufacture and rigidity, respectively. When choosing a boot, you also need to choose the right size.

Skates curly and recreational must be selected strictly on the foot. However, they should not rub, and be comfortable. When riding, they stretch slightly and then take the shape of a leg. As for hockey skates, due to their stiffness, it is advisable to purchase a model one size larger.

Material manufacturing shoes need special attention. They can be from plastic, an imitation leather and genuine leather.

Best of all, of course, is suitable for genuine leather, as it retains heat, does not rub, and covers the leg well. Although it is more expensive and keeps moisture worse.

Cheaper is a skin replacement. At the same time, it protects it from moisture better, but it keeps the heat worse and fits the leg.

Least of all, both for beginners and professionals, plastic shoes are suitable. Their only advantage is low cost.

There are also two ways of fixing - these are clips or lacing. Fully tighten the shoe on the leg clamps are not capable, which can lead to injuries. In addition, they wear out, and their replacement is impossible. Lacing is preferred. It contributes to a good fixation of the boot and can be easily replaced if necessary.

As for blades on skates, stainless steel is considered the best option for beginners. Such blades serve well enough and are not subject to corrosion.

Carbon steel keeps grind better and is harder. Since it is corroded, nickel or chromium is added to the production. The cost of such blades is higher.

Shoes Features

Shoes figure skates tall and thin. They have heels and lacing. As a rule, figured skates do not have a heater made of fur or fleece, but they are often complemented by padding with the possibility of thermoforming (the material heats up and adjusts to the features of the legs) or anatomical foam inserts that ensure a tight fit to the foot and reliable fixation.

For those who choose an indoor ice rink, figured shoes without insulation is not a problem. But if you are going to ride outside in cold weather, your legs may freeze. Count on a warm sock and buy skates on the size is no longer worth it: shoes can not provide the necessary fixation and the leg will hang. It is better to prefer recreational skates.

Shoes figure skates are distinguished by stiffness. The toughest models are designed for skiing with jumps, as they are able to protect the skater's feet from damage during landing.

To check the stiffness of the boot, squeeze the upper part of the shaft with your fingers. If the skin does not give in and does not lose its shape, these are hard shoes. If inferior under pressure - soft.

Lovers do not make sense to choose very hard shoes. Such models are more expensive, and for ordinary skating stiffness will be more of a hindrance than an advantage: it will be uncomfortable to ride.

Blade features

Blades of figure skates have a rather long straight part. It provides easy gliding on the ice.

mnopedia.org

The stability of figure skates and convenience during sliding depend on the radius of curvature of the blade, or, in other words, the degree of bending. The greater the radius and, accordingly, the area of ​​contact of the blade with ice, the more stable the skates.

The radius of curvature of the blade

The smaller radius of curvature of the blade provides comfort when turning and turning. Therefore, if you are not going to spin on the ice, it is better to choose skates with a larger radius.

Another feature that can always be distinguished figured skates - sharp teeth in front of the blade, designed to perform complex shapes and stops.

The teeth of the universal figure skates will not be useful for beginners, but they will not interfere either: they are located above the level of ice and cling to the surface in rare cases.

Also pay attention to the blade material. In the production of more expensive models used high carbon steel. Such skates are lighter, and the blades resist corrosion better and stay sharp longer.

Low carbon and alloyed steels are heavier and rust faster. Such skates require more thorough care.

How to measure curly skates

Put on your skates, lace them up completely and walk for 2-3 minutes. Boots should not be tight, otherwise you will break the blood circulation and your legs will quickly freeze. Nor should they hang out: in such skates, despite the tight socks, the leg will be poorly fixed, stability will decrease.

The heel should be pressed to the back of the boot, the toe should tightly clasp the leg. If, under these conditions, you are comfortable in the selected skates, it means that they are suitable for you.

Who will fit figure skates

Universal figure skates are suitable for regular skating, and for performing simple shapes (if you are a beginner self-taught skater and are not going to do jumps and complex rotations).

Simple models of figure skates are cheaper than pleasure ones. Therefore, if you want to ride on a warm indoor rink and do not want to spend money, universal figure skates - your option.

Well, if you are going to ride on the street and will not perform even simple figures, it is better to consider recreational models.

Boot Features

Shoes for recreational skates (they are also called fitness skates) are lower and softer than those of curly ones, due to which it is more comfortable to ride in them. In addition, the skates are complemented by an inner insulated boot. In some models you can get it and dry it, which is quite convenient.

As for lacing, there are classic versions with laces, and models with clips and velcro for quicker and more comfortable putting on of the skates.

Also among walking skates there are models with anatomical inserts made of synthetic foam material. Due to these inserts, the skates provide even more comfort and fix the leg well during the skating.

What skates to buy

How to choose pleasure skates

Boot Features

Shoes for recreational skates (they are also called fitness skates) are lower and softer than those of curly ones, due to which it is more comfortable to ride in them. In addition, the skates are complemented by an inner insulated boot. In some models you can get it and dry it, which is quite convenient.

As for lacing, there are classic versions with laces, and models with clips and velcro for quicker and more comfortable putting on of the skates.

Also among walking skates there are models with anatomical inserts made of synthetic foam material. Due to these inserts, the skates provide even more comfort and fix the leg well during the skating.

Blade features

Unlike figure skates, the walking blade is more straight, with a large radius of curvature. Due to this, the skates are more stable, but less maneuverable. However, maneuverability is not needed for mass skating.

There are models with teeth or without them. Pleasure skates have less teeth than curly ones, and they are located higher, so that they cannot accidentally catch on ice.

Warm, soft and stable skates, which also often have a bright original design - ideal for mass skating.

As well as figured, recreational skates should tightly clasp the leg, but not put pressure on the toes.

What skates to buy

How to choose hockey skates

Hockey skates are designed to ride in a special technique necessary for the game. This is more of a run than the usual slip skating. Therefore, it is better to choose such skates for the game.

Hockey skates consist of three parts: a boot, a plastic cup to which the blade is attached, and the blade itself.

hockeyworld.com

Models for beginners, as a rule, are non-separable: the glass and the blade are a single whole. Более профессиональные модели позволяют менять лезвие, поскольку оно изнашивается быстрее ботинка и стакана.

Любительские хоккейные коньки

Ботинки любительских хоккейных коньков довольно мягкие, в них комфортно учиться. Носок часто дополняется пластиковым мыском для защиты пальцев.

In addition to the toe, in amateur skates there is no protection against strikes: they have a soft tongue and side parts made of inexpensive synthetic materials.

Also in the amateur level skates there are no additional options for customizing shoes. However, they have a relatively low cost, which makes them an attractive option for beginners.

Semi-professional hockey skates

Such models are designed for people who often play hockey and want to improve their level.

Skates of this class are better protected: they have a hard tongue that simultaneously protects the foot from bumps and protects the pressure of the laces, and enhanced side protection with stiffeners.

Semi-professional skates Graf Supra with thermoforming. sportmaster.ru

Thermoformed inner shoes are also found in semi-professional skates. The special foam material when heated becomes more plastic and adapts to the anatomical features of the hockey player's legs.

Some models have swap airbags. When you press the button on the boot boot, the air chamber in the heel inflates or deflates, allowing you to find the most comfortable position.

Skates Reebok with an air chamber. refinedguy.com

Such skates are worth buying if you plan to develop your playing skills and, possibly, participate in amateur competitions.

How to measure hockey skates

Hockey skates do not match the size of ordinary shoes. Different manufacturers have their own dimensional grids, with which you can decide which skates you will measure.

When you find the right size and wear shoes, move your foot so that the heel is pressed tightly against the back.

Fingers should touch the sock, but do not rest on it, otherwise when riding you will be uncomfortable.

You shouldn’t buy skates one size larger than a sock: a shoe will not fix your foot well, and you will be uncomfortable.

Hockey shoes are divided not only by size, but also by the width of the pads. So, if the skates fit you in length, but not in size, just try on the others.

The width of hockey skates are divided into:

  • D or R (regular) is the standard width that suits most hockey players.
  • C or N (narrow) - narrower boot, about 0.6 cm already standard.
  • E or W (wide) - the shoe is about 0.6 cm wider than the standard one.

The width of the legs can be determined at home or in the store - there should be a special line. If there are no rulers, you can simply measure the skates and navigate according to your feelings.

So, you picked up your skates. How to make them serve as long as possible? Here are a few golden rules.

How to care for skates

  1. After each ride, wipe the blades with a dry cloth. This will help avoid corrosion.
  2. Carry the skates with the covers on the blades, otherwise they may be damaged against each other or cut things in the bag.
  3. Wear covers when skating on a hard surface, otherwise you will quickly ruin the blade sharpening.
  4. Do not try to sharpen your skates on your own, only give them to specialized workshops.
  5. Do not forget to dry skates. Take out the insoles (or internal boots, if it is recreational skates), lace up the shoes and put them in a place with good ventilation.
  6. Do not dry your skates on the battery: leather shoes may lose their shape.

That's all. If you have tips on how to choose skates or how to care for them, write comments.

Design features: boots

Any figure skates have two main parts - these are figured boots and blades, which are complemented by front teeth. Thanks to such a constructive decision, skating can jump, make complex elements in the form of tracks of steps, for example. Choosing professional figure skates, pay attention to the following parameters:

  • Shoe top material: the best solution is genuine leather with a breathable structure that stretches well and keeps heat in your legs. In professional models, leather can be used in two or even three layers, which gives the shoe greater rigidity.
  • The shoe lining also plays a big role, as it serves as a layer between the foot and the top of the shoe. The lining provides comfort wearing shoes. In cheap models, she also warms the top of the models, while in expensive figured shoes her task is depreciation.
  • The sole of most models is either leather or plastic - each material has its own characteristics.

Jackson Freestyle DJ2190

These professional figure skates for children are professional and are suitable for learning one-turn jumps. The distinctive features of the model include moderate stiffness of the boots, created from genuine leather, and a polyurethane top coating, which makes them easy to care for. The anatomical shape of the pad provides steady support for the feet Thermoforming is soft, and the inner padding has thermal memory, which ensures a comfortable fit of the boot. The model has a multilayer sole Layered Cork Leather Sole, made of genuine leather and cork. This combination allows you to improve the depreciation properties of the sole, reducing its weight and increasing thermal insulation.

Wifa Prima Set Mark IV YTH

Skates for figure skating kids professional Wifa has always attracted the attention of buyers with high quality, smooth glide. Parents note that it is easy to choose models for boys and girls, as they are distinguished by a stylish design. Professional models are made of genuine leather and supplemented with a special breathable lining. The advantage of shoes - in orthopedic insoles. These figure skates are suitable for beginner skaters who study for one or two years.

Adult skates: for beginners

Experts suggest to novice figure skaters to pay attention to models with fixed blades. Professional figure skates are produced by a number of brands. Consider the most popular:

  1. Graf (Switzerland). This brand offers a whole line of skates. Shoes in them are made of synthetic thermoformed material. Thanks to a hard toe, reliable fixation of the ankle during training and skating is ensured, so the risk of injury is minimized. The sole of the boot is made of lightweight plastic.
  2. Edea (Italy). This brand offers to pay attention to the skates with a compensating and shock-absorbing insole, which compensates for the load in the vertical direction. Professional figure skates Edea designed for skaters who have already reached the third sports level. With the help of these models you can easily train different types of jumps, including triple ones. Brand know-how is a unique lacing system in the hook area, which will not break under any circumstances. In the sports class, figure skates of this brand are considered to be the easiest and the best, as evidenced by reviews and experts, and the athletes themselves.

For semi-professionals

Today in any city you can buy professional figure skates. Ekaterinburg is a lot of sports shops, ready to help with the choice of both beginner and professional athlete. For the semi-professional level, tighter boots and high-quality blades are suitable. They are sold without blades, so it is important to choose the right parts for them. Among the best models for semi-professional skating buyers include:

  1. Risport rf3. These figure skates will help you perform any complex elements on the ice. The boot is made of genuine leather, resistant to various influences. Anatomical shape provides a tight fit to the ankle and foot, so the ride will be more confident and clear. Thanks to a two-layer sole from genuine leather, good cushioning and heat-insulating properties are ensured.
  2. Wifa Skatec Deluxe is professional figure skating with comfortable and reliable boots. It is considered the most universal model. Users note that for third-fourth level skaters, these models are just perfect.

For professionals

In professional occupations in any sport, high-quality and reliable equipment is required. Figure skates for athletes who practice skating should have the highest rigidity, blades made of high-quality metal, so that for a long time they maintain a good sharpening.

Buyers who choose a truly high-quality inventory, mark such professional figure skates as Graf Edmonton. They allow you to perform jumps in three or four turns and any other complex elements on the ice. The boots are made of genuine leather, the inner padding is soft due to thermoforming, which ensures an anatomical fit on the ankle. According to reviews, skates fit perfectly on the foot, ensuring maximum fixation.

The models Graf, popular in Russia, have proven themselves well. Figure skates are designed for medium skating and coaching staff, so they allow not only to improve their skating technique, but also to learn new elements. The distinctive features of the models are in a comfortable shoe, a multi-layered leather sole and a high-quality blade.

Pin
Send
Share
Send
Send

lehighvalleylittleones-com