Women's Tips

Step by step instructions for applying shilaka at home


Each woman dreams of beautiful and well-groomed nails, but not everyone can cope with such a task. Many women complain of thin and brittle nails, which grow and give a beautiful shape, which does not work, and you want it so much!

When extended acrylic or gel nails came into fashion, they created a real sensation and an explosion in the neil industry, the fair sex finally got what they wanted: long, well-groomed nails that could be given any shape and color. In addition, they were quite strong, which allowed them to be worn for several weeks, or even a month, without additional correction.

But the era of accrued nails gradually passes away, which is to say: they are not always comfortable in everyday life, and their own nail plate under artificial materials deteriorates, as a result, after several such procedures, their nails look much worse than before the extension. But what to do next?

Regular lacquer, although not as harmful as acrylic or gel, keeps a little and bad, after three days the manicure has to be redone, because the edges peel off and crack very quickly.

But you want so much the original and well-groomed nails, and so that this beauty lasts, as long as possible, longer! It turns out that there is a solution - the use of a special innovative means, shellac.

Professionals in the beauty sector have been working for a long time to create a tool that will create a beautiful, bright and, most importantly, lasting manicure. And the decision was found just a few years ago - a mixture of lacquer and gel, shellac, today is one of the most popular nail procedures, well-pressed, loved by many, building up.

You probably wondered how to make a manicure using shellac coating, because this is truly an amazing tool that allows you to forget about your nails for at least two or three weeks!

During the procedure, you will not have to build up your nails, shellac is covered with your native marigolds, which will not only play with new colors, but will also strengthen well with the coating itself.

It is no wonder why the popularity of such a way of nail care has soared to unprecedented heights, because in one session a woman gets not only a strong and beautiful manicure, but also covers her native nails with a means that strengthens them well!

Thanks to the mixture of varnish and gel in its composition, shellac covers your native nail plate with a thin rubber layer, which softens the blows and makes the nail more elastic, flexible and strong.

Plus, such a procedure in the salon will be much cheaper than building the same acrylic nails, besides, such a manicure looks much more natural and more natural, which is very popular and relevant today.

The process of applying shellac

The technique of applying shellac is not as simple as it may seem at first glance, therefore, if you want to get a really high-quality manicure, then it’s better to turn to a professional master. No, of course, it is possible to cover nails with shellac at home, but this will require a whole list of tools and materials. This will include:

  • Means for dehydration, the so-called disinfector, which is necessary for better adhesion of the nail plate and gel polish.
  • UV curing lamp - without it, the shellac simply won't dry.
  • A special tool for the base coat, in appearance it resembles a very durable and strong varnish, which also has healing properties.
  • Orange sticks.
  • Nail polish remover, alcohol, cotton sponge.
  • Shellac for the main coating (colored varnish).
  • Means for securing manicure.

For the price, a set of such materials will cost you, of course, not cheap, although, on the other hand, if you learn how to apply shellac yourself, then acquiring such a set and doing it yourself will help you save a considerable amount of money.

By the way, it is very simple to remove such a coating: for this there is a special tool, it is absolutely not necessary to cut anything, as it was with the extension. You need to buy materials from one company, they interact better with each other, which means that the coating will stay better and longer. Where can one buy? The easiest way to do this in specialized stores or order on the open spaces of online stores.

How to apply shellac? Instructions for use

You, for certain, met a photo of a beautiful manicure and would like to repeat the same beauty on your own marigolds, with the help of shellac, this is real! It is represented by a huge color palette, which means you can choose for yourself exactly the design that is most liked. So, the procedure is performed in several stages, one after the other:

  • To start the nails, as in any other manicure, you need to pre-process - get rid of the regrown cuticle, file and shape the nail plate.
  • The next stage is grinding. It is carried out using a special grinder or an ordinary soft polishing file. Through this effect, the villi are formed, which contribute to better adhesion of the nail surface and shellac.
  • Further, all nail plates need to be treated with an antibacterial agent, which degreases it and allows the varnish to smoothly cover the nails.
  • The base coat is applied in one thin layer using a special technique.
  • Each finger must be held under the UV lamp for 25 seconds so that the shellac is fixed and hardened.
  • The next stage is the application of a special color coating technique.
  • Re-drying under a UV lamp.
  • Drawing the last fixing varnish layer, repeated drying.
  • At the end, the excess varnish around the nails is removed, and a sticky layer is removed from the surface of the plates using cotton sponge and alcohol, which was formed as a result of applying shellac.
  • Oil is applied to the cuticle.

This method of coating nails has a considerable number of advantages:

  • Due to the fact that it not bad strengthens brittle and weak nails, with its help you can grow your own, long and natural.
  • The huge color palette allows you to choose any version you like for any image and style.
  • Shellac lasts a long time, unlike ordinary varnish, for about 2-3 weeks, he is not afraid of homework, water and cooking, while he does not tarnish and does not lose luster.
  • The coating is removed easily and quickly, for this it is enough to purchase a special tool for removal.

Shellac (shilak) - features, terms and principles

This type of manicure is a combination of lacquer and gel, giving the coating resistance. He holds tight enough on the nail plate, so that a woman can safely do household chores without worrying about her manicure.

Such nail art is beneficial in long trips or at the spa, because it will make you forget about the frequent updating of manicure and pedicure. Since each layer is fixed by a UV lamp, the beauty of the nails can last more than two weeks. You can independently master shilak. Stepwise application at home will help to cope with this task.

Shellac gives an opportunity to make a manicure a work of art.

Note! With such a coating, the nails are almost impossible to break, and the separation of the nail plate does not threaten. In addition, shellac does not crumble, durable and perfectly keeps the shape of the nails.

Despite the fact that, as mentioned above, shellac has a durable coating, the timing of its wearing depends on some features:

  • the quality of the product (the better it is, the longer the original manicure is preserved),
  • strict adherence to the rules (the use of a degreaser increases the resistance of the gel polish),
  • beautiful and durable nails will keep the coating longer, unlike weakened nail plates, on which cracks and chips may form,
  • If the physiological characteristics of the body are such that the growth rate of the nails is high, then the removal of the gel polish may occur before the deadline: a clean nail plate, peeking out from under the color coat, will spoil the whole look.

This beautiful and fashionable manicure will delight its owner about 3 weeks.

At the same time, this type of manicure should not be used if the nails are infected with a fungus. Also, experts recommend to postpone shellac for the period of treatment with antibiotics. And, of course, the state of the nails is important.

Before using shilak, follow the step-by-step application at home, and conduct a series of restorative and restorative sessions.

Advantages and disadvantages of shellac (shilaka)

All processes in cosmetology have both pluses and minuses. Before deciding on a shellac procedure, you should carefully examine the positive and negative sides of this type of manicure.

Benefits of shellac:

  • Long-term and sustainable coverage. A manicure made with gel polish can last up to three weeks without losing any shine or changing for the worse.
  • The composition of shellac does not include toluene and formaldehyde harmful to the body, which makes it completely harmless to the nail plate.
  • Shellac literally saves fragile, prone to bundle of nails. Due to the dense coating, it fixes the regrown part of the nail, giving it greater strength. So lovers of long nails can confidently wear just such a “predatory” manicure.
Manicure variation with shellac
  • You can master the proper technique of using shellac at home. There is nothing difficult, you just need to thoroughly study the procedure for applying the product and purchase tools.
  • Manufacturers of shellac continue to expand its color range, so that any woman will find a shade to their liking. And processing by a UF-lamp gives to manicure precious gloss and a saturation.

Disadvantages of shellac:

  • If the rules are not followed, unsightly chips may occur the next day, or the coating will be completely removed from the nail.
  • Shellac allows you to grow marigolds desired length, although this effect is temporary.

Shellac decorates, but does not cure fragile nails.

And the general situation does not fix, you will need medical procedures.

  • The longevity of shellac is indisputable, but even it is able to get off the nail, if that is thin and weak. And if the hands are in constant contact with water, the coating also deteriorates rapidly.
  • If the shellac is suddenly covered with microcracks, it should be removed, because dust and dirt that can cause a fungal disease will get on the nail.
  • Another drawback, albeit a minor one, is the price of the product. It is much higher than the cost of ordinary varnishes.
Shellac gel polish
  • Some gel polishes, especially low-quality ones, can leave behind an unsightly yellowness on the nails. It is, however, easy to remove with the help of restorative and healing procedures.

What tools and instruments are needed

To make shilak at home, you need to know its step by step application.

You need to purchase the necessary tools:

  • manicure: wooden stick, nippers, nail file, spatula, buff to polish the surface of the nail,
  • cuticle softener, or oil that will remove it,
  • brush, cleansing marigolds from dirt,
  • degreasing agent,
  • UV lamp (36 W),
  • base,
  • shellac,
  • top tool
  • smooth napkins so that the villi do not spoil the whole process,
  • drug to remove stickiness (replaced by acetone or alcohol, but these substances should be tested on shellac, so as not to remove the gloss).

The quality of manicure with the use of shellac depends on the quality of materials. First of all, attention should be paid not to the price, but to the proven brand of product.

Shellac, base coat and top must be manufactured under the same brand name.

Then they will be ideally suited to each other.

In order not to be mistaken in the choice, it is worth buying kits for silac, which have everything you need, including a UV lamp.

Preparation of nails for shellac

It is easy to master shilak at home.

It is only necessary to study its step by step application.

  • First, you should get rid of the skin near the hole marigold. Gently push it away with a stick and apply the substance to eliminate. After dipping your hands in warm water, wait 5 minutes.
  • To process a nail covering, to give a desirable look.
Nail shaping
  • Prepare the nail by polishing it with a soft nail file.
  • Carefully remove fat from the nail, as well as from the skin around it, with a degreasing agent or nail polish remover.

How to make shellac (shilak) at home (instructions for beginners)

The process of covering nails with shellac is almost not different from the procedure of manicure with the use of ordinary varnish.

The main difference of this kind of nail art is the use of a UV lamp, it is necessary to dry each applied layer. Only with well-dried shellac, the manicure will be smooth, smooth and durable.

We will analyze step by step the technique of shilak. Step-by-step application at home will help to quickly master this practical type of manicure.

Foundation application

The most important procedure. Without a basic tool will not work a beautiful and even manicure. It is important that the basic tool was of excellent quality, then it will not harm the nail, and strengthen it, protect it from the harmful effects of external factors. The base is applied with a thin layer twice, carefully drying each in the lamp for about 10 seconds.

Before applying the bottle twist, holding his palms for half a minute. But shaking is not recommended because of possible damage to the structure of the gel polish. Cover the nail with shellac, making sure that it does not stain the skin (in case of contact, wipe with a smooth napkin).

Coating prepared nails

The initial layer should be almost transparent. After applying it, the nail is placed under the lamp, where it is polymerized for 2 minutes. After this time, a second layer is applied, thicker, and the same amount of time is also dried under the lamp.

Final action

Apply top coat, thoroughly dry under the lamp for 2 minutes. An ordinary fixer will not work, it is a special coating that guarantees a durable and long-lasting result.

After all procedures, wipe the nails with a liquid to remove stickiness applied to a smooth cloth.. You can also use alcohol, but it is worthwhile to check the reaction of shellac on it in advance so that the alcohol “does not eat” the mirror shine.

Interesting fact! To protect the skin of the hands from the negative effects of ultraviolet radiation, before the procedure of manicure, you must apply sunscreen on the brush.

What will happen to the nails after applying shellac (shilaka)

If shilak at home is applied correctly, its step-by-step application is strictly observed, it will not harm the health of the nails.

Caring for nails makes it possible to strengthen them

However, it should be remembered about the individuality of each organism. Someone's nails do not react to fashionable nail art, but for someone they will lose strength and become stratified. In this case, come to the aid of health procedures that can restore the former strength of the nails.

To improve the nail plate, apply:

  • vegetable oil. In a slightly heated oil, poured into the bath for the hands, lower your fingers and wait a few minutes. The procedure takes place every day for about 7 days.
  • foods rich in vitamins D, C, E, A, are required in the diet. Then the healing process of nails will go faster.
  • iodine, which is applied to the nails in the form of a reticulum (it is not worth much to smear the nails with iodine, in this case it turns from an ally into an enemy, strongly drying the nail surface).
  • lemon juice, which is rubbed into the nail surface, whiten, strengthen the nails.
  • sea ​​salt, with which health baths are performed, makes nails strong and eliminates delamination.
Sea salt is known for its healing properties.
  • paraffin baths heal marigolds and have a beneficial effect on the skin of the hands (baths can be made independently, or you can be pampered by entrusting this procedure to the masters in the salon).
  • medical varnishes restore the surface of nails.

Secrets of applying shellac (shilaka) at home

Those who decide to independently master fashionable nail art need to know about the nuances of applying a manicure called shilak.

Step-by-step application at home allows you to quickly and accurately carry out this procedure.

  • The cuticle and the skin near the marigold must be moistened with oil (you can use vegetable) before starting work.
  • Upon termination of drawing stickiness is removed the special means applied on a smooth napkin. Between the base and the color layer, stickiness should remain so that the layers adhere firmly to each other.
  • If, when applied, one of the substances gets on the skin of the finger, it is immediately wiped gently.
Do not leave the varnish on the skin, it is better to remove it immediately
  • After applying the base, you can not touch the nails with your fingers, so as not to leave sebum on them. The surface of the marigold must remain dry and clean.
  • To keep the marigold strong and healthy, you need to give them a 14-day rest after two times wearing shellac. Any healing procedures aimed at restoring and nourishing nails will have a positive effect.

Как правильно снять гель-лак (шеллак)

Поскольку этот вид лака отличается от обычного, то и процедура удаления немного сложнее привычной.

Необходимо аккуратно пилочкой подпилить поверхность шеллака. After that, wad up each nail with cotton pads with nail polish remover and wrap with foil on top. After 10 minutes, everything is removed along with shellac. If there are shaded areas, gently scrape off the gel polish with a stick.

Foil conditioning to facilitate shellac removal

The procedure for creating nail art with the help of silage at home is difficult only at first glance. Strict step by step application, the observance of all the subtleties, guarantees a fashionable and durable manicure without harm to the health of nails.

How to apply shellac at home? Watch useful video:

Step-by-step technology of applying shellac independently at home. See the video tutorial:

How to remove and apply shellac at home? Find out from the video:

6 qualities of gel polish, which you did not know

  1. Persistence is the main advantage of gel polish. Some ladies are able to walk with such a manicure for about 2-3 weeks, and he retains his magnificent appearance throughout the entire period. If the procedure for covering nail gel varnish was performed technologically correctly, then there will be no scratches, cracks and chips on it, and you will hear a lot of good reviews about your pens.
  2. Drying speed is another indisputable plus of long-term coating. Due to the fact that it polymerizes (hardens) under the influence of ultraviolet, the drying process is reduced to just a few minutes. That is, you can not be afraid for the condition of the manicure immediately after the procedure and feel free to go about your business, whereas after coating with ordinary varnish you will need more time to dry it. Sometimes it can be delayed and in order not to spoil the manicure, the young lady has to wait about 30-40 minutes.
  3. Ease of application. To make a house cover with your own hands, you do not need to have any specific skills. A long-term manicure is performed in the same way as a simple lacquer coating with only one difference: it does not dry out on its own, but is polymerized in a UV lamp.
  4. Aligns the nail plate, making it perfectly smooth.
  5. Does not cause an allergic reaction.
  6. It does not have a negative effect on the nails, but on the contrary, it is an excellent firming agent that allows natural nails to gain strength and health.
  7. Virtually no odor, if we draw an analogy with the usual varnish.

Among other things, the technology of covering nails with gel varnish implies fixing it with a finishing top. Thanks to him, the nails acquire a unique shine, such a coating does not rub off, does not turn yellow and does not become cloudy in the process of wearing.

Manicure with gel varnish with your own hands: what you need to have

So, let's imagine that you have already decided to try to make gel nail polish at home on your own. We list what you need to purchase before starting the procedure:

  1. Special base for gel polish,
  2. Finish (top)
  3. Soft polisher,
  4. A jar of colored gel polish (or more, depending on the chosen design),
  5. UV lamp (LED lamp),
  6. Preparatory tool, for example, primer or bonder. It will be needed for degreasing the nails and better adhesion of the artificial material with the plate,
  7. Cotton pads or special wipes that leave no villi,
  8. Liquid to remove the sticky layer,
  9. Gel polish remover,
  10. Orange stick or pusher
  11. File

If you are trying to coat your nails with gel polish for the first time, but do not know exactly how to do this and how long it takes to cure in the UV lamp, we advise you to also stock up with a timer for timing, if your lamp is not equipped with one.

The main stages of applying gel varnish: step by step technique

  1. The nail plate must be carefully prepared before coating. Gel polish is applied only on the sawn and degreased surface. First, adjust the shape and length of the file, move the cuticle with the pusher, and then remove the shine from the nail plate using a polisher. Remember that the plate can not be sawed, you just need to walk a little on the surface, making it rough. After that, apply a degreasing agent and treat the marigold with a primer.
  2. Cover the nails with a gel polish base. Consider that in most cases it is very liquid, so you don’t need to type a lot on the brush. Be sure to cover the end of the nail.
  3. Place the handles in the UV lamp for 2 minutes. In the LED-lamp for fixing the layer will need only 30 seconds.
  4. Apply the first layer of gel polish and dry it in the lamp for 2 minutes. After that, turn them off again and send them back to polymerize for the same time.
  5. We finish the manicure with a gel-lacquer finish top. Apply it in a thick layer on the entire surface of the nail, including the ends. You need to "seal" the nail plate, in order to avoid chipping and detachment of artificial material. If the top is liquid, we recommend applying it not on all the nails at once, but alternately. For complete drying you will need 2-3 minutes.
  6. Wipe the nails with a cotton pad or a cloth moistened with liquid to remove the sticky layer. Now your manicure is ready.

If you carefully repeat all the points, you will be able to learn how to make a gel polish at home quickly and, most importantly, correctly.

Discovering secrets: how to cover your nails with gel polish without errors

Unfortunately, for one reason or another, gel lacquer at home may not work, and even the training video viewed on the world wide web does not help to correct errors. Let's look at the frequent problems of newbies to answer the question “how to properly coat the nails with gel polish.”

  1. Problem number 1: gel lacquer clears from the free edge of the nail on the second or third day after application. This is one of the most popular problems, which can be solved quite simply: it is imperative to “seal” the end of the nail plate. Additionally, you can cover the nails from the inside, that is, turn the hand palm up, gently fluff the inside of the nail near the fingertip with a finishing top and send it to the lamp.
  2. Problem number 2: during the polymerization gel varnish shrivels on the surface of the nails. To avoid this, do not apply too thick layers of varnish. Properly paint the nails with gel polish, too, need to be able to. The thicker the coating layer, the worse it will polymerize in the lamp, while several thin layers will lay flat on the nail surface and harden completely.
  3. Problem number 3: gel lacquer exfoliates from the cuticle side. This happens if during the first days after a manicure your pens are constantly in contact with water. Refrain from visits to the pool, sauna or bath, as well as general cleaning and frequent washing of dishes (for these cases, you can use gloves).

There is an erroneous opinion that you can make a high-quality manicure with a long-term coating only in a professional nail design studio. This is wrong, as at home you will be able to cover your nails with gel polish. It is important not to neglect the list of necessary materials, try to choose quality products of famous brands and comply with the coating technology.

How to smooth your nails with gel polish

The first difficulties arise with the base. This simple manicure layer often causes severe frustration for beginners. Why base gel varnish unevenly falls? What are the difficulties?

Most often the problem lies in the degreaser. When using a sparing fresher or its alcohol counterparts, particles of moisture and fat remain on the nails, and this creates bald spots when applying the base. Changing the composition solves the problem.

Smooth base application is possible if you follow several rules:

  • Excellent preparation of nails - the best manicure device

Few beginners know that gel nail polish is very bad on wet nails after trimming manicure. Do not make a gel polish and after nail polish removers, and after oil products.

The task of hygienic manicure is not just to give the nails the desired shape, but also

  1. remove the flakes from the exfoliated tip - the edge of the nail should be perfectly flat,
  2. slightly remove the top glossy layer from the nail plate and the old “absorbed” coatings,
  3. gently remove the skin of the cuticle and pterigy under it,
  4. remove dead cells from lateral rollers.

The biggest danger at this stage is not to cope with nail polishing. Here are two tips: when using cutters, place them on the nail and work without pressure, and when choosing a buff, give up rigidity over 240 grit.

  • Degreasing and "priming"

Auxiliary means will not only clear the surface of the nail from the invisible particles of dust and fat, but also increase the adhesiveness of the nail plate with the base. First use a dehydrator, then acid-free primer.

  • Proper base application

The main secret - the base should not fall on the skin. But there, where later the color will be applied, the base is needed. According to the primary classical scheme, a base is applied to the nails with a thin-thin layer.

Also, beginners should remember that when drying the base spreads, and leave a small distance to the skin.

In the new format, masters prefer to apply the base with a more dense layer, but not too much: to align the nail plate and high-quality base for the subsequent cake layers of gel polish.

The brush is placed vertically and the cut is covered with a thin layer of the base.

Base covered nails are placed for 60 seconds under a UV lamp. If the lamp is LED, then for 10-30 seconds. In order for the base to grab in an even layer, it is necessary to dry either one finger at a time, or first 4, and then separately large.

What to do if gel polish falls unevenly

Gel polish falls unevenly - a typical problem for beginners.

The reasons may be the following:

  1. Poor quality shellac - it is better to use formulations of proven manufacturers,
  2. Unsuccessful color in the collection - almost every brand of gel polishes can be found in the collection of a couple of unsuccessful flakonchik, why this is not clear, but the gel polish can strip and have to put additional layers
  3. The pigment fell to the bottom - to roll the bottle in the palms, but not to shake,
  4. The base is unevenly applied - it is removed by a properly made coating,
  5. A UV lamp is turned on nearby - the composition spontaneously polymerizes, solidifying by waves,
  6. Gel Polish is applied incorrectly.

The last moment will help eliminate or very good workshops from the pros, or a clear following the following tips:

  1. Shellac need a little. Exactly as much as the brush holds. If the composition is trying to drain, carefully remove the excess on the edge of the bottle.
  2. Gel polish is applied by "stretching" drops. Not three strokes, as in the usual manicure, and a large drop, which gently stretch the brush in all directions - under the cuticle, on the sides, to the cut of the nail. Gel Polish spontaneously does not dry out, and you can work slowly.
  3. Three thin layers are better than one or two thick. It is the thick layers that cause the bubbles and waves on the gel polish during drying.
  4. Seal the edge of the nail in the process of the last applied layer - with light movements of the brush along the cut.
  5. Dry enough time. In the UV lamp 120 seconds, LED 30 seconds.
  6. Remove the sticky layer with special degreasing compounds, and not with alcohol and acetone-containing liquids. Violation of this rule can lead to any unpredictable consequences - up to a change in the color of shellac or the appearance of bald spots on it.

If bald patches appear in the process of applying gel varnish, do not be afraid: the second or third layer will solve this problem.

Flaking or chipping of the coating is rare, and is either a result of using the base / gel polish / top from different manufacturers, or ignoring the correct manicure and primer at the preparatory stage of work.


How to apply gel polish on the cuticle

There are no special difficulties here.

When working you need:

  1. Pull off and fix the cuticle with your finger when applying gel varnish,
  2. Hold the brush at an angle of 45 when painting in the area of ​​the cuticle,
  3. In the cuticle, the first and second layers should be performed with an almost dry brush,
  4. If it does not work, take a thin brush and first paint over the cuticle, then proceed to a regular brush,
  5. Dispense gel polish by stretching, not smears,
  6. Do not hurry.

With the correct execution of all manipulations, even from the first time you will be able to apply gel polish butt to cuticle.

When all layers are applied, the nails are covered with a top - they seal the edge, polymerize in the lamp and remove the sticky layer. Beautiful homemade gel nail polish ready!

Main advantages of gel polish Shellac

Shellac gel varnish differs from other nail coloring options:

  • extraordinary ease of application
  • the resistance of the coating to damage
  • no allergies and irritations
  • strengthening the nail plate,
  • speed and ease of removal.

Speaking of the latter. A high-quality basis for Shellac varnish becomes a prerequisite for quick and smooth removal of shellac coating - no tweaks and no extra effort! And the nail itself will not exfoliate, will not turn yellow and will not be soaked in dye.

Shellac gel polish is an amazing variety for nail design! In addition, with such a manicure, you can not worry about causing possible damage to the nails with ordinary everyday tasks - washing dishes, cleaning, preparing lunch, taking a bath or visiting a tanning salon. All this you can do with confidence, without fear that the nails will lose their attractive appearance.

We are waiting for you in our nail salon in Kiev! Our shellac will make your nails the most beautiful!

What is shellac

Shellac is a gel polish, that is, a type of modern coating for manicure, which combines all the best qualities of a traditional varnish and modeling gel. The first on the market such a coating under the brand Shellac presented the company CND. Now this product produces many manufacturers, but the name stuck to the entire line of such hybrid varnishes.

What is the secret of the popularity of this coverage?

From the classic professional varnish, shellacs received rich bright colors, natural shine and simplicity of application, which allows you to do this manicure quickly and efficiently. On the other hand, shellac is odorless, it is worn for a long time, it does not peel off and is not erased, just like the best gel nail polishes.

  • Requires minimal nail preparation. Can be applied without primer.
  • It adheres perfectly to the surface of the nail, but does not make it heavier and does not harm it at all.
  • It is applied as simply and quickly as a classic varnish.
  • Keeps on nails 2 - 3 weeks, withstands mechanical and other effects.
  • Removed without long filings using shellac remover.
  • Does not require a break: you can re-nail the nail right after removing the old coating.

The minimum set of tools and materials for shellac manicure:

  • Bafic for natural nails. It should be abrasive 220 - 240 grit.
  • Degreaser. It provides good adhesion of varnish and is necessary for disinfection from the fungus.
  • Degrease lint-free wipes. Temporarily they can be replaced with cotton pads.
  • A UV lamp with a capacity of more than 36 watts A hybrid CCFL + LED lamp is also suitable.
  • The basic coating under shellac.
  • Color coating or several colors, depending on the type of manicure.
  • Top coat for shellac, or fixer.
  • Isopropyl alcohol 99%. It is required to remove the adhesive layer from the coating. It is even better to use a klinsser - special means for removal of a sticky layer.

You will also need the usual manicure tools and care products: nail scissors or a hatchet, a nail file, an orange stick, Bondex and cuticle oil.

We advise you to buy all this in bulk to save money. For example here: https://prostoopt.com.ua/

Gradual application of shellac manicure

  1. Before the procedure, a hygienic manicure is performed in the usual way: the cuticle is removed, shaped into the nails. If the shape of the nail suits you, you need a little sawing them all the same. In the salon or an experienced master before applying shellac dry manicure is performed with a two-time antibacterial treatment.
  2. Buff nail polishing. Polishing should be done once or twice a month during the next nail overlap. Buff should be kept along the nail plate and polished with light longitudinal movements. After the procedure, you need to remove dust particles with a brush.
  3. Degrease the surface of the nails. Such processing is required. If there is no special means (for example Scrub Fresh), then use alcohol or nail polish remover. This is better than nothing, but chipping and peeling are possible after such treatment.
  4. Primer application (bonddex). For shellac, this is an optional, but highly desirable operation. The primer provides adhesion of the nail surface with layers of lacquer lying above. Choose a primer without toluene and formaldehyde: this is the layer that comes in direct contact with the body. After applying this tool, processing under a UV lamp is not required. But if the nails look glossy or wet, then you need to remove excess liquid. They may cause detachment.
  5. Application base. When applying the base layer (Base Coat) you need to keep the brush almost parallel to the nail. This makes it possible to apply the thinnest layer possible. It is necessary to cover the entire nail surface, from the root of the cuticle to the tips of the nail. And then “seal” the tip, that is, paint over with the same thin layer its end face. База требует фиксации под УФ лампой при мощности 36 Вт в течение 1 минуты. Отлично зарекомендовали себя базовые покрытия на каучуковой основе. Они делают ногтевую пластину абсолютно ровной и готовой к покрытию цветным лаком. После базового слоя стирать липкую дисперсию ни в коем случае не нужно.
  6. Нанесение цветного шеллака. The technique of applying colored varnish is the same as for the base. The thinnest layer of colored shellac is applied with a thin brush parallel to the surface of the nail. Then the butt is painted, and the nail is sent under the UV lamp for 10 seconds. When the cover of all fingers on the hand is finished, hold the brush under the lamp for another 1 minute to dry completely. In this way, apply two layers on all fingers, and polymerize the resulting coating under UV light.
  7. Applying a protective layer. The fastening layer (Top Coat) protects the manicure from scratches, chips, scuffs. When applying it, be especially careful: if you get a fixative on the cuticle or skin, then this can “lift” the ready colored layer. A single-layer coating is performed on both hands, the tips of the nails are carefully “sealed”, and the brushes are sent alternately for processing under the lamp for 2 minutes. It is important to remove the sticky layer from the nails with a degreasing agent. This is done after the top coating is finally polymerized.
  8. Completion of manicure. The final touch is the treatment of the cuticle with a special care oil. This may be CND Solar, Milv or another agent with vitamins, oils, etc.

How many shellac

The average time that a manicure with shellac will remain intact on your nails is about three weeks. How much you carry a specific, made by you or an experienced master of coverage, depends on:

  • Techniques and skills manicure,
  • The quality of materials
  • Regularity of nail care.

Shellac removal

There are at least two ways to remove shellac from the nails: civilized and not very. Gash nail before removing this type of coating is not necessary. Therefore, many seek to remove Shellac with a home bath with acetone and subsequent scraping with a wooden stick. We warn against the similar handling with the nails. [disclaim] For proper and gentle removal of shellac, special tools and tools are required, namely:

      - Disposable sponges on a sticky basis or foil,

      - Orange stylus and nail file,

    - Oil for the treatment of cuticles.

[/ disclaim]
The procedure for removing shellac from the nails:

  1. Wash hands thoroughly before removing varnish.
  2. Sponges on the glue base are impregnated with a solvent, for example, Product Remover made by СND.
  3. The sponge is wrapped around the finger so that the impregnated surface completely covers the nail, is fixed with a sticky surface.
  4. Now wait 10 minutes while the solvent interacts with the varnish layers.
  5. The next step is to remove the dressings from the fingertips and remove the remnants of shellac with a soft orange stick that does not damage the nails.
  6. Removal of the smallest residues of shellac with a swab moistened in a solvent.
  7. Processing nail care oil.

Branded sponges on the glue base can be replaced with plastic fingertips or foil wrappers. Directly to the nails, you can apply cotton swabs or cotton pads soaked in a solvent. The main thing is not to use acetone and solvents for ordinary varnishes. They have a bad effect on the nails with prolonged contact, and simply are not effective enough. After erasing shellac with acetone, it takes a long time to mechanically nail the nails, which does not add to their attractiveness and health.

We make manicure shellac VIP-class: subtleties and secrets

Each master has in his asset not one secret of a durable and successful manicure, but there are some rules known to everyone:

    - All three types of coating must be of the same manufacturer. Best of all, if it is a classic for CND shellacs, but it is possible to use varnishes of other brands in the kit.
    - Careful treatment of the cuticle is important. If shellac gets on it, the coating can quickly peel off.
    - The base and colorful layers should be as thin as possible. This is necessary for better graspability. Top layer may be thicker than others.
    - In order for the varnish layers to firmly “seize”, the UV lamp must be of sufficient power: 36 watts.
    - You can not use consumables (napkins, discs) with a pile, otherwise you will have to start all over again.
    - After two applications, you should give your nails a two-week rest before the next coating with shellac or another type of manicure. This is a great opportunity to pamper your hands with nutritious baths, paraffin manicure or other caring procedures.

If the coating peels off?

The reasons for the detachment of expensive manicure can be very different, from the violation of technology to the structural features of the nail plates, beriberi, hormonal characteristics, taking certain medications. If the manicure is performed by a non-professional, then the reason for failure is often lack of experience. Layers of shellac, especially colorful, are very sticky, and it is nevertheless very difficult to apply them neatly.

Popular types of nail decoration with shellac

If you entrust the application of shellac to a high-class master, then you are guaranteed to bring a manicure for three or four weeks. How to make sure that he does not bother you during this time? Use different decorating techniques! Shellac perfectly performed and french, and gradient, and stamping, and other types of manicure.

Classic french shellac Blue french shellac

Wearing a French shellac, instead of a paint coat, glue “smiles” and cover them with a light creamy varnish. Optionally, use a bright and voluminous Cream Puff or noble and quiet Stidio White from CND. The palette of these varnishes allows you to choose from dozens of options for french: milk, cream, pink and other shades. Use for additional decoration painting, bouillons and straziki, etc.

The combination of gel Polish with stamping

Stemping - a great easy way to effectively decorate the nails. Shellac or ordinary varnish - for a stamp without a difference. Graceful drawings with special varnishes and for stamping are applied to a high-quality manicure under the top coat. The lacquer is applied to a metal plate with a pattern, the excess layer is removed with a spatula, and then the pattern is transferred onto the nail with a round stamp.

Lunar - smile line near the cuticle

The popular moon manicure is a type of service jacket, only the “smile” is transferred closer to the cuticle, and this manicure is usually performed with colored varnishes. The technique of doing it with shellac is no different from french.

Gradient ombre

Ombre, also known as a gradient manicure, is performed using a special brush. The method used for classic lacquers to perform an ombra using a sponge sponge for shellac is not suitable. Therefore, a gradient manicure very popular in this season can only be done by an experienced master mixing colors right on the nail plate. One of the colors is applied at the cuticle, and the other at the edge of the nail. Then the zero brush colors mix gently and evenly. The layer is dried under the lamp and the procedure is repeated.

Water manicure with shellac

The brightest red pattern. High technology performance. Water manicure near Blue patterns

This type of decoration combines perfectly with the technology of shellac. After fixing the first paint layer of shellac, the nails can be painted using the so-called water-based lacquers. For the best effect, lacquers from the rich CND palette are used. Paints of selected colors are mixed in water to obtain abstract patterns and stains. A finger with a treated cream or skin closed with scotch tape is immersed in colorful stains parallel to the water. The drawing remains on the nail. Then top layer is applied. This technique requires great dexterity and skill, but is very effective and fashionable this season.

What we love shellac coating

Shellac is a great and very common manicure technique. She practically does not limit the master of nail art to any framework. Beginners will also be able to realize themselves with the help of modern materials and technologies Shellac, creating a bright and unique nail design.

Shellac manicure is easy to remove by yourself, it has a positive effect on the nail plate, does not require deep filing, is compatible with almost any decoration technique and is harmless to health.

Shellac is also loved because it saves a lot of time, both during the visit and before the next application. But this is on condition that you assign the manicure to a good master: the technique of use is not simple, and has a lot of pitfalls and nuances.

Popular Shellac nail coverings can be made in the salon or on your own. But prices in beauty salons are unreasonably expensive, and to learn how to make shellac at home requires a lot of patience, a lot of expensive tools and materials. Therefore, an experienced manicurist working directly with clients is a compromise and the most optimal option.

Materials you need

It should be borne in mind that this procedure may seem rather complicated and intricate in the first times, because you need excellent eyesight, a strong hand and a lot of accessories, without which you will not get the desired result and even the risk of infection will appear.

Before you start applying shellac, make sure that you have everything you need, namely.

UV or LED lamp

Many are afraid of this subject and try to find a way to do without it, but in fact it is impossible. If the nail plate does not give in to radiation, the lacquer will simply not be absorbed and spread. In fact, there is practically nothing to fear. For two minutes the bluish light will not cause any harm to your hands.

First stage

  • Round off your nails, removing all the sharp edges and making the perfect half, using a regular file.
    Then with a hard synthetic polisher, swipe several times in the same direction on the nail surface, try not to touch the skin, because if there is a violation, wounds are formed - the “entrance gate” for any infection, dirt and dust. If the skin is still injured, be sure to treat this place with an antibacterial agent.

  • After, be sure to put on the nails liquid to remove stickiness, or use regular diluted alcohol. Nail plates should glitter and not have a single greasy spot, otherwise even the most resistant gel will crack prematurely and even peel off.

  • After cleansing, touch the nails only with brushes in order not to contaminate the plate again, do not touch it with your fingers. If there are wet traces of alcohol liquid, you can wipe the nails with a lint-free cloth or cotton swabs.

Main stage

  • Gently cover the nails with a thin layer of basic agent. It is desirable that the untouched surface of 2-3 mm in size remains from the cuticle. Then place your hands under the lamp for 2 minutes. If during drying there is a burning sensation, it means that the varnish has leaked onto the skin or you have applied it too greasy. Remove unnecessary liquid with a special orange stick. It should make a clear dry surface of the marigold.

  • Now proceed to applying shellac itself. Carefully cover the entire nail area with it, leaving no gaps and making vertical lines in one direction. Use the lamp again for 2 minutes, as in 4 point. A good option would be the alternation of hands: first, the little finger of the left hand - drying - the little finger of the right hand, etc. This will save time, and also the likelihood that you will hook the not yet dried varnish with your hand, decrease. It is recommended to apply two layers of medium density, and after each re-place your fingers in the lamp.

Final stage

  • When the shellac is completely dry and evenly distributed throughout the area, fix the manicure with a special finish gel. It is recommended to apply a layer of medium thickness so that the color does not fade and no smudges remain. Dry again for 2 minutes.
  • When all of the above steps are done, complete the procedure with an alcohol-based grease remover. Do not worry, the whole shellac will not be completely removed, only a sticky waste layer formed after the lamp.

Security measures

Do not forget that shellac is a rather difficult substance and can cause significant harm if used improperly. For example, when removing it. Many people make a gross mistake: they hook a piece of lacquer and start to delay it, hoping that the tool will be removed by itself without unnecessary trouble, but this is far from the case. You risk serious damage to the integrity of the nail and lose the upper surface.

It is also necessary to pay attention to the condition of the nails in the first days after applying the gel. Because of the color layer, you are unlikely to be able to see blue spots or cracks, but if there is pain, swelling, or redness of the cuticle, immediately consult a doctor. Do not close your eyes to skin lesions around the marigolds, since all this is dangerous by the penetration of bacteria, and because of the proximity of the capillaries - an infection in the blood itself.

Completion: if you have done everything correctly and clearly, you should get beautiful nails with a perfect, rich and fresh manicure, which will please its owner with durability and save you from daily adjustment of peeling varnish.

Video on how to apply shellac: